s-114

Golf III/Jetta III ‘93-’99 & Cabriolet ‘95-’02

Our complete sport handling sets will transform you car’s handling from “ho-hum” to “great”! Turbo-gas struts and shocks mated with shorter, stiffer springs will dramatically improve you car’s handling (and looks). our kit is fully assembled, ready to install and will lower the ride height 1”. All new strut bearings, snubbers, dust covers and hardware take all the guesswork out of creating a complete sport suspension system!

4 cylinder only #SN14935 . . . .$549.95

RECYCLED ASSEMBLIES

If you are super economy minded and only "want to get a good pair of strut assemblies taken off a running test driven car." These are disassembled, struts checked, bearing repacked, and new snubbers added, installed and reassembled. Not cleaned and painted!

Golf/Jetta 4 cylinder ‘93-99.5, Cabrio ‘95-02

Front #SN9092 . . . .$99.95/pair

Rear #SN9079 . . . .$79.95/pair

CORE CHARGES

All complete assemblies (including new) are sold on an exchange basis. Rebuild kits and individual components are sold outright (no core deposit). Core deposits on assemblies are $18/pair for front assemblies, $15/pair for rear assemblies. Cores returned to us must be assembled.

STRUT BEARINGS

Our strut bearings are original equipment German-made bearings. There are a lot of junk bearings being manufactured in the Far East that “look” original but only last a couple thousand miles at best. If your struts are clunking every time you hit a bump, it’s time for new strut bearings. Don’t waste your time and money installing junk. We only sell the best!

4 cylinder all ‘93-99.5

#SN2010 . . . . . . . .$30.00

VR6 have a bearing that can be replaced separately from the mount. Don’t bother - if you’re going to replace one, always replace the other!

Mount #SN12978 . . . . . . . .$19.95

Bearing #SN14746 . . . . . . .$15.95

We also stock brand new and recycled driveshafts at substantial savings. Call with your needs!

SNUBBERS, DUST BOOTS

Always replace the snubbers when installing new shocks or struts. Typically, snubbers break down first, allowing the shock or strut to “bottom out”, ruining it very quickly! Dust boots help keep dirt and contaminants from destroying the oil seals.

Snubber

Front #SN2005 . . . . . . . .$3.75

Rear #SN11990 . . . . . . . .$14.95

Dust boot

Front #SN4491 . . . . . . . .$2.95

Rear #SN11903 . . . . . . . .$5.99

BOLTS

It’s always a good idea to use new fasteners when installing new components. When you’re dealing with shocks and struts, the lower bolts are often so rusted that you have no choice but to cut them off. Front struts are held on with two nuts and bolts per side, rear shocks with one nut and bolt per side.

Front (does one side)

#SN10617 . . . . . . . .$6.95

Rear (does one side)

#SN2164 . . . . . . . .$1.95

STRUT MOUNT TOOL

This socket has a cutout so you can loosen the upper nut while holding the strut shaft with an allen key. Makes strut removal easy!

German #SN13782 . . . . . . . .$43.95

Non-German #SN14470 . . . . .$35.95

SLOTTED NUT SOCKET

This unique tool is required to disassemble struts (not necessary if replacing complete assemblies). The slot drive engage the round retaining nut, with a hole in the center so you can use an allen key to prevent the strut shaft spinning. A must-have if you’re replacing inserts, springs or bearings.

#SN3503 . . . . . . . .$19.95

SPRING COMPRESSOR KIT

We sell a spring compressor tool; it’s not U.S. made, but it works and will last for 100 spring jobs. It’s plenty strong enough for VW springs, a little weak for Ford Truck springs. It’s low price can fool you. Follow the directions.

#SN3530 . . . . . . . .$19.95

REMANUFACTURED DRIVESHAFTS

Used to be, people replaced individual CV joints rather than the entire drive axle. With the prices coming down on complete remanufactured axles, it usually makes more sense to replace the axle--not to mention the time saved! Our remanufactured drive axles are top quality and built to new standards. They are sold on an exchange basis and carry a 1 year limited warranty. All axles are for vehicles with air bags, call for price and availability on others.

Standard 4 cyl. Gas ‘93-99.5

Manual transmission

Left #SN15437 . . . . . . . .$99.99

Right #SN15446 . . . . . . . .$99.99

Auto Transmission

Left #SN15247 . . . . . . . .$99.99

Right #SN15249 . . . . . . . .$99.99

TDI

Manual transmission

Left #SN14686 . . . . . . . .$99.99

Right #SN15446 . . . . . . . .$99.99

VR6 all

Left #SN38387 . . . . . . . .$129.95

Right #SN38386 . . . . . . . .$129.95

CV JOINTS

We still stock CV joints individually, for those who prefer not to replace the entire driveshaft. Genuine German GKN or Lobro.

Inner

All (exc. 4 cylinder automatic)

#SN2133 . . . . . . . .$89.95

Outer

VR6, all

#SN17016 . . . . . . . .$139.95

4 cylinder, all

#SN1905 . . . . . . . .$95.95

CV BOOTS

If your CV boots are torn, don’t wait to replace them! Contaminants can ruin the joint in no time at all. New boots are a lot cheaper.

Inner

All (exc. 4 cylinder automatic)

#SN5127 . . . . . . . .$19.95

4 cylinder automatic

#SN15454 . . . . . . . .$17.95

Outer

4 cylinder all

#SN15450 . . . . . . . .$19.95

VR6 All

#SN15453 . . . . . . . .$19.95

Catalog Index

A-3, Jetta, Golf, GTI, Cabrio '93-99.5

Parts Place, Inc. 2300 N. Opdyke Tel: (248) 373-2300 Fax: (248) 373-5950