Fits & Compatibility
| Year | Model | Engine |
|---|---|---|
| 1990 | Passat | 2.0 16V |
| 1991 | Passat | 2.0 16V |
| 1992 | Passat | 2.0 16V |
| 1992 | Passat | 2.8 VR6 |
| 1993 | Passat | 2.0 16V |
| 1993 | Passat | 2.8 VR6 |
| 1994 | Passat | 2.8 VR6 |
| 1995 | Passat | 2.0 GAS |
| 1995 | Passat | 2.8 VR6 |
| 1996 | Passat | 1.9 TDI |
| 1996 | Passat | 2.0 GAS |
| 1996 | Passat | 2.8 VR6 |
| 1997 | Passat | 1.9 TDI |
| 1997 | Passat | 2.8 VR6 |
Passat Rear Axle Beam Bushing
Axle Bushing Mount: Passat 90-97
You May Also Need
(see DIY Tip Below)
In stock. Ships within one to two business days.
VW Passat rear axle beam bushing. This is a direct fit replacement for worn out rear axle bushings. When these rubber mounts rot it causes the rear axle to sway and wobble. Replacing the rear axle bushings will tighten it up like new. Sold each, 2 needed per vehicle. Should be replaced in pairs.
Condition: New
Warranty
All products carry a 100 day warranty. Engines, cylinder heads, and injection pumps carry an extended 12 month warranty. See our warranty page for details.
Do-it-Yourself Tip
Fits & Compatibility
| Year | Model | Engine |
|---|---|---|
| 1990 | Passat | 2.0 16V |
| 1991 | Passat | 2.0 16V |
| 1992 | Passat | 2.0 16V |
| 1992 | Passat | 2.8 VR6 |
| 1993 | Passat | 2.0 16V |
| 1993 | Passat | 2.8 VR6 |
| 1994 | Passat | 2.8 VR6 |
| 1995 | Passat | 2.0 GAS |
| 1995 | Passat | 2.8 VR6 |
| 1996 | Passat | 1.9 TDI |
| 1996 | Passat | 2.0 GAS |
| 1996 | Passat | 2.8 VR6 |
| 1997 | Passat | 1.9 TDI |
| 1997 | Passat | 2.8 VR6 |
You May Also Need
(See DIY Tip above)
