VW 100mm Outer CV boot kit. This style boot is used on the outer CV joint (wheel side of driveshaft) on Volkswagens with 100mm inner CV joints. This boot should be replaced if you ever notice a rip in yours or if the CV joint is being replaced. The boot kit includes a new boot, clamps, hardware, and grease for repacking the joint. Sold each, 2 required per vehicle.
To install the 100mm outer CV joint you will need a 30mm socket to detach the driveshaft from the wheel hub, and a CV bolt tool to unhook the driveshaft from the transmission. Once the axle is free you should be able to slide it out and away from your VW and replace the CV boot. If you would like to purchase a kit to do all 4 CV joints at one time and add life to your driveshafts we have them in a complete kit (part #14803).