MK1 90mm Passenger Side Driveshaft

Fits & Compatibilities

All Volkswagen passenger side Rabbit, Rabbit Pick-up, Rabbit Convertible, Scirocco, Jetta 75-84

Year Model Engine
1975Rabbit1.5 GAS
1975Scirocco1.5 GAS
1976Rabbit1.5 GAS
1976Scirocco1.6 GAS
1977Rabbit1.5 D
1977Rabbit1.5 GAS
1977Scirocco1.6 GAS
1978Rabbit1.5 D
1978Rabbit1.5 GAS
1978Scirocco1.5 GAS
1979Rabbit1.5 D
1979Rabbit1.5 GAS
1979Scirocco1.6 GAS
1980Jetta1.7 GAS
1980Rabbit1.5 D
1980Rabbit1.6 GAS
1980Rabbit Convertible1.6 GAS
1980Rabbit Pick-up1.5 D
1980Rabbit Pick-up1.6 GAS
1980Scirocco1.6 GAS
1981Jetta1.6 D
1981Jetta1.6 GAS
1981Rabbit1.6 D
1981Rabbit1.7 GAS
1981Rabbit Convertible1.7 GAS
1981Rabbit Pick-up1.6 D
1981Rabbit Pick-up1.7 GAS
1981Scirocco1.7 GAS
1982Jetta1.6 D
1982Jetta1.7 GAS
1982Rabbit1.6 D
1982Rabbit1.7 GAS
1982Rabbit Convertible1.7 GAS
1982Rabbit Pick-up1.6 D
1982Rabbit Pick-up1.7 GAS
1982Scirocco1.7 GAS
1983GTI1.8 GAS
1983Jetta1.6 D
1983Jetta1.6 TD
1983Jetta1.7 GAS
1983Rabbit1.6 D
1983Rabbit1.6 TD
1983Rabbit1.7 GAS
1983Rabbit Convertible1.7 GAS
1983Rabbit Pick-up1.6 D
1983Rabbit Pick-up1.7 GAS
1983Scirocco1.8 GAS
1984GTI1.8 GAS
1984Jetta1.6 D
1984Jetta1.6 TD
1984Jetta1.7 GAS
1984Jetta1.8 GAS
1984Rabbit1.6 D
1984Rabbit1.7 GAS
1984Rabbit Convertible1.7 GAS
1984Rabbit Pick-up1.6 D
1984Rabbit Pick-up1.7 GAS
1984Scirocco1.8 GAS

MK1 90mm Passenger Side Driveshaft

Item #: 1932

Driveshaft: Jetta, Rabbit, Scirocco 75-84 - 90mm, Passenger Side, Reman

VW driveshaft.Our remanufactured driveshafts have been totally disassembled, cleaned, inspected and remanufactured by a specialty driveshaft rebuilder. Parts are replaced to make them equal to new standards, reassembled, greased, sealed, painted and packaged. Good as new but are more affordable! $50 core charge.

$
$119.95

Availability: In stock

Do-it-Yourself Tip


The easiest way for a DIYer to correct a CV joint problem is to replace the entire driveshaft as an assembly. By buying an 8 point Allen star and the 30mm socket a novice mechanic can replace the entire assembly in 1/2 an hour. (Remove the drive shaft by removing the 30mm nut out by the wheel, then the 6 bolts on the inner CV, drop the inner end of the CV down and pull it out toward the transmission. Then just slip the replacement unit into place and bolt it up)

Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register