MK3 VR6 Brake Master Cylinder

Fits & Compatibilities

Jetta and Golf w/VR6 1995-1999, Cabrio 1995-2002, and Passat 1996-1997. W/ ABS, 23.81mm Diameter.

Year Model Engine
1995Cabrio2.0 GAS
1995GTI2.8 VR6
1995Jetta2.8 VR6
1996Cabrio2.0 GAS
1996GTI2.8 VR6
1996Jetta2.8 VR6
1996Passat1.9 TDI
1996Passat2.0 GAS
1996Passat2.8 VR6
1997Cabrio2.0 GAS
1997GTI2.8 VR6
1997Jetta2.8 VR6
1997Passat1.9 TDI
1997Passat2.8 VR6
1998Cabrio2.0 GAS
1998GTI2.8 VR6
1998Jetta2.8 VR6
1999Cabrio2.0 GAS
1999GTI2.0 GAS
1999Jetta2.8 VR6
2000Cabrio2.0 GAS
2001Cabrio2.0 GAS
2002Cabrio2.0 GAS

MK3 VR6 Brake Master Cylinder

Item #: 18840

Brake Master Cylinder: Jetta VR6, Golf GTI VR6, & Others 1995-1999

VW master cylinder. We only carry original equipment quality, direct fit master cylinders; you don't ever want to skimp out on brake components. The master cylinder is responsible for converting your foot pressure into stopping power for your vehicle. If your brakes feel spongy, or the pedal is progressively getting softer it is time to replace your master cylinder, before your car no longer stops at all.

$
$119.95

Availability: In stock

Do-it-Yourself Tip


When you replace the VW master cylinder you may want to use a new brake fluid reservoir for your Golf GTI VR6, Jetta VR6, Passat or Cabrio. This will make sure you don't contaminate your new fluid. Flush fresh brake fluid through your brake lines when you change the master cylinder. Never try to reuse old fluid; over time it draws moisture from the air and then it can't handle the heat generated while stopping.

Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register