VW wheel bearing assembly. Our complete remanufactured assemblies include the spindle with the bearings already pressed in, saving you a lot of time and work. The spindle can be replaced using regular hand tools, no need for a press! These use new bearings with an inspected and painted housing. To accommodate axles with 100mm CV joints. $100 core charge applies.
The easiest way for a DIYer to correct a CV joint problem is to replace the entire driveshaft as an assembly. By buying an 8 point Allen star and the 30mm socket a novice mechanic can replace the entire assembly in 1/2 an hour. (Remove the drive shaft by removing the 30mm nut out by the wheel, then the 8 bolts on the inner CV, drop the inner end of the CV down and pull it out toward the transmission. Now you can remove the wheel bearing assembly and replace it).