Golf III/Jetta III '93-'99 & Cabriolet '95-'02
CLUTCH KITS COMPLETE
Do the job right with our complete clutch kits. Kits include a matched clutch disc and pressure plate, release plate (2.0 L only) and retaining ring (2.0 L0 only). These are OEM clutch kits, manufactured by LUK or Fichtel & Sachs.
2.0 L 4 cylinder
'93-94 210 mm #SN14427 . . .Price
'95-99.5 210 mm #SN14429 . . .Price
VR6
'93-99.5 228 mm #SN17876 . . .Price
TDI

All VWs '86-97
This bolt holds all VW water-cooled clutches on. It's 9mm, 12 point. We have the tool for it, 9mm 3/8 socket.
Clutch Bolt Tool
COMPLETE ENGINES
If you're contemplating having a shop rebuild your engine for you, labor charges can get pretty steep. Why not replace the whole engine? Whether you have a 2.0 L, a TDI or a VR6, we've got an economical solution for you - an excellent recycled engine can cost far less than just the parts needed for a rebuild! We also have some new engines in stock at far, far less than dealer prices. Call for availability, our stock is always changing. From Price
MOTOR MOUNTS
All Golf/Jetta '93-99.5, Cabrio '95-02
Left rear #SN9216 . . . .Price
Right rear #SN14514 . . . .Price
Buy all 3 and save even more!!
Engine Mount Kit
Cabrio only '95-02 (Cabrio has an extra motor mount)
Right front #SN18815 . . . .Price

THROW-OUT BEARINGS
The throw-out bearing in 2.0 L models can be replaced without removing the transmission. VR6 and TDI models must remove the transmission to replace the bearing. This is a good deal of work to replace just the bearing, so always replace it when you do a clutch job!
CLUTCH INSTALLATION HARDWARE KITS
These kits include the flywheel bolts, pressure plate bolts, rear main seal and transmission main shaft seal. 2.0 L kits also include the clutch pushrod seal and bushing. VW says you should always use new bolts, and of course, seals!
2.0 L
VR6/TDI
