Rear Strut (Shock) Assemblies*
The best standard German Boge & Sachs are great for all standard street driving.
*These do not include springs. Rear assemblies are the insert and the housing, and generally the bottom spring plate, and the bottom bushing all in one.
_
Rab./Jetta '75-84; Scir./Cab. '75-88 Std. OEM - SACHS/BOGE. These are fine for normal driving.
Std. OEM - SACHS made in Mexico for VW. Normal driving. These are excellent quality at a reasonable price. They are made for VW® Mexico plants.
High Performance SACHS/BOGE Turbo Gas. This is nut and bolt installation of GTI handling on any standard car.
Golf/Jetta '85-92 Std. OEM SACHS/BOGE. These are fine for normal driving no need to upgrade. These are made for the VW plant by this manufacturer in Mexico.
High Performance German SACHS/BOGE Turbo Gas - Golf/Jetta '85-99.5 all including VS-6, TDI, GTI & GLI.
#SN11624 . . . . . . . . . . . .Price
Same as above made by SACHS/BOGE in Mexico.
#SN15198 . . . . . . . . . . . .Price
Golf/Jetta 4 cyl. '93-99.5
#SN14998 . . . . . . . . . . . .Price
Golf/Jetta '99.5-04 New Bettle '98-04
#SN18265 . . . . . . . . . . . .Price
Passat 4-cyl. only Sedan and Wagon '90-97
#SN12573 . . . . . . . . . . . .Price
Corrado
#SN13332 . . . . . . . . . . . .Price
VW Fox - (COFAB) OEM VW Brazil
Sedan #SN2147 STD.....Price
Wagon #SN2148 STD...Price
Audi Fox, Dasher Sedan - Rear Shock
#SN2157 (cofab) . . . . . .Price
Audi Fox, Dasher Wagon - Rear Shock
#SN13731 (cofab) . . . . .Price
Quantum Sedan
#SN2158 . . . . . . . . . . . .Price
Audi 4000 All to '88br />
Pick-up Rear Springs OEM
Just found in the back of a warehouse all covered with dust, 84 pairs of OEM VW Springs made back in '82. As far as we know, these are the only original springs left. You don't necessary have to replace them but if you are updating your pick-up, don't miss out.
REAR AXLE BEAMS
Rear axle beams bend in curb hitting accidents and also tend to loose their strength and sag. The axle beam is what keeps the rear wheels straight, there is no adjustment. If the rear wheels aren't straight up and down and also parallel to the car you need a rear axle. Simple to change just bolt and unbolt. Sold with out spindles, etc. All recycled.
Rabbit, Scirocco, Jetta, '75-84
Golf & Jetta, '85-87 STD
Golf & Jetta, '88-92 STD
Golf, Jetta, GTI, GLI, '85-92 (not 16 valve)
Golf, Jetta A-3 '93-99.5
#SN35870 . . . . . . . . .Price
Passat '90-97 Specify
#SN35867 Most . . . . . . . . .Price
Fox Sedan '87-93
#SN34138 . . . . . . . . . . . .Price
Golf, Jetta '99.5-04 . . . . . . . . .Call
Others . . . . . . . . . . . . . . . . . . . . .Call
Rear Springs
Saggy Bottom? Does the bottom of your Golf, Rabbit, Jetta bottom out with or without your 300 pound friend or tool box in the back. Our heavy duty springs are the answer.
Rabbit, S, Jetta'74-84 New Heavy Duty
#SN2143 . . . . . . . . .Price/pair
Golf/Jetta '85-92, Heavy Duty Rear
#SN2144 . . . . . . . . .Price/pair
Golf/Jetta A-3 '93-98 4 cylinder Heavy Duty Rear Springs
#SN18183 . . . . . . . . .Price/pair
Pickup Rear Springs - See middle column on this page
Why Replace Springs?
Springs sag after 100,000 miles and your car just doesn't have its original ride! New Springs all the way around will help make your car closer to new!
Rear Shocks Made Easy! Here's How:
Changing the rear shocks on a Rabbit, Jetta, Scirocco, Golf, etc. is much easier than the front, and can be done by the ordinary shade tree mechanic without using a spring compressor. You don't have to take a cartridge out of a strut tube; it all comes together as one piece. Please read the manual instructions carefully, but basically, you can loosen the bolts first when it's on the ground, then jack up the car to release the spring tension, then remove the bolts, install the new struts, lower the car onto the springs, and the weight compresses the springs. Then you do the final tightening on the ground.
