MK2 100mm Passenger Side Driveshaft - Reman

Fits & Compatibilities

Jetta GLI, Golf GTI,and Corrado G60 85-92 with 100mm inner CV joint.

Year	Model	Engine
1985	GTI	1.8 GAS
1985	Jetta	1.8 GAS
1986	GTI	1.8 GAS
1986	Jetta	1.8 GAS
1987	GTI	1.8 16V
1987	GTI	1.8 GAS
1987	Jetta	1.8 GAS
1988	GTI	1.8 16V
1988	GTI	1.8 GAS
1988	Jetta	1.8 GAS
1989	Corrado	1.8 G-60
1989	GTI	1.8 16V
1989	GTI	1.8 GAS
1989	Jetta	1.8 GAS
1990	Corrado	1.8 G-60
1990	GTI	1.8 GAS
1990	GTI	2.0 16V
1990	Jetta	1.8 GAS
1991	Corrado	1.8 G-60
1991	GTI	1.8 GAS
1991	GTI	2.0 16V
1991	Jetta	1.8 GAS
1992	Corrado	1.8 G-60
1992	GTI	1.8 GAS
1992	GTI	2.0 16V
1992	Jetta	1.8 GAS

MK2 100mm Passenger Side Driveshaft - Reman

Item #: 9164

Driveshaft: Jetta, Golf 85-92 - 100mm, Passenger Side, Reman

Our remanufactured driveshafts have been totally disassembled, cleaned, inspected and remanufactured by a specialty drive shaft re-builder. Parts are replaced to make them equal to new standards, reassembled, greased, sealed, painted and packaged. Good as new but more affordable!

Be the first to review this product

$119.95

Availability: In stock

Quantity

Do-it-Yourself Tip

The easiest way for a DIYer to correct a CV joint problem is to replace the entire driveshaft as an assembly. By buying an 8 point Allen star and the 30mm socket a novice mechanic can replace the entire assembly in 1/2 an hour. (Remove the drive shaft by removing the 30mm nut out by the wheel, then the 6 bolts on the inner CV; drop the inner end of the CV down and pull it out toward the transmission. Then just slip the replacement unit into place and bolt it up.)

« Back to Main Product Info

Be the first to review this product