VW Jetta & Golf wheel bearing assembly. Our complete assemblies include the spindle with the bearings and hub already pressed in, saving you a lot of time and work. The spindle can be replaced using regular hand tools, no need for a press! These are new bearings with inspected and painted housing. $40 core charge applied.
***These are available on a return and rebuild basis only - you send in your core and we rebuild it for you.
If you're not sure if your spindle is rebuildable give us a call at 586-757-2300***
Do-it-Yourself Tip
Purchasing the complete VW Jetta & Golf wheel bearing assembly is the easiest way for a DIYer to correct front wheel bearing problem. Armed with only an 8 point Allen bit, a 30mm socket and a few basic hand tools a novice mechanic can replace the entire assembly in 30 minutes. Remove the drive shaft by removing the 30mm nut out by the wheel, then the 6 bolts on the inner CV; drop the inner end of the CV down and pull it out toward the transmission. Now you can remove the wheel bearing assembly and replace it.