MK3 Driver Side Driveshaft

Fits & Compatibilities

Jetta and Golf 4-cylinder w/manual trans 1993-1999, Jetta and Golf 4-cylinder w/auto transmission and w/o airbags 1993-1995, Cabrio 1995-2002, and Passat 1990-1994 (All 4-Cylinder) and Passat 1995-1997(4-cylinder with manual transmission only).

Year Model Engine
1990Passat2.0 16V
1991Passat2.0 16V
1992Passat2.0 16V
1993Golf2.0 GAS
1993Jetta2.0 GAS
1993Passat2.0 16V
1994Golf2.0 GAS
1994GTI2.0 GAS
1994Jetta2.0 GAS
1995Cabrio2.0 GAS
1995Golf2.0 GAS
1995Jetta2.0 GAS
1995Passat2.0 GAS
1996Cabrio2.0 GAS
1996Golf1.9 TDI
1996Golf2.0 GAS
1996GTI2.0 GAS
1996Jetta1.9 TDI
1996Jetta2.0 GAS
1996Passat1.9 TDI
1996Passat2.0 GAS
1997Cabrio2.0 GAS
1997Golf1.9 TDI
1997Golf2.0 GAS
1997GTI2.0 GAS
1997Jetta1.9 TDI
1997Jetta2.0 GAS
1997Passat1.9 TDI
1998Cabrio2.0 GAS
1998Golf1.9 TDI
1998Golf2.0 GAS
1998GTI2.0 GAS
1998Jetta1.9 TDI
1998Jetta2.0 GAS
1998New Beetle1.9 TDI
1999Cabrio2.0 GAS
1999Golf1.9 TDI
1999Golf2.0 GAS
1999GTI2.0 GAS
1999Jetta1.9 TDI
1999Jetta2.0 GAS
1999New Beetle1.9 TDI
2000Cabrio2.0 GAS
2001Cabrio2.0 GAS
2002Cabrio2.0 GAS

MK3 Driver Side Driveshaft

Item #: 15437

Driveshaft: Jetta, Golf 93-99, Passat 90-97 - Manual Trans, Driver Side

VW driveshaft. This driveshaft is for 4-cylinder Jettas, Golfs, and Cabrios that have flat style inner CV joints. Our remanufactured driveshafts have been totally disassembled, cleaned, inspected and remanufactured by a specialty drive shaft re-builder. Parts are replaced to make them meet new standards, reassembled, greased, sealed, painted and packaged. Good as new but more affordable! $50.00 core charge. Check the fitment section below to make sure your car has the required setup for this style driveshaft.

Refundable core charge: $50 applies. (Click here for more info)

$
$119.95

Availability: In stock

Do-it-Yourself Tip


The easiest way for a DIYer to correct a CV joint problem is to replace the entire VW driveshaft as an assembly. By buying an 8 point Allen star and the 30mm socket a novice mechanic can replace the entire assembly in 1/2 an hour. (Remove the drive shaft by removing the 30mm nut out by the wheel, then the 8 bolts on the inner CV, drop the inner end of the CV down and pull it out toward the transmission. Now you can remove the wheel bearing assembly and replace it).

Description

Details

93-99.5,CABRIO M/T 95-02 W/O AIRBAGS *CORE $30* ****REBUILT****
Additional Information

Additional Information

Fits Jetta and Golf 4-cylinder w/manual trans 1993-1999, Jetta and Golf 4-cylinder w/auto transmission and w/o airbags 1993-1995, Cabrio 1995-2002, and Passat 1990-1994 (All 4-Cylinder) and Passat 1995-1997(4-cylinder with manual transmission only).
SKU 15437
Display Part # on the PDP No
Part # 1HM-407-273
Display Alternative 1 Part# on PDP No
Part # Alternative 1 N/A
Display Alternative 2 Part# on PDP No
Part # Alternative 2 N/A
Core Charge
* Core charges apply to certain products only
$50.00
Special Price N/A
Reviews